Katrina Parks Table November 05th, 2018 - 07:04:03
This will help when I put it all together that they're all square you can see that this side over here is perfectly square, and I use my level here to help me and we're gonna make the cut here in just a second. You can see now. After I did the cut they're perfectly in line with each other, okay, I set up my project and I'm gonna put two holes on each side of the board's, so one here and then two holes here and I'm gonna do that for all four of My skirts and then I will attach it to the top here right in the center soft to do some lines and make sure I line it up correctly.
Alright, the top skirt has all the credit jig holes in it and I'll be assembling here in just a minute. Okay, so, in addition to the Ripe jigging of the sport, I'm also using a tight bond. Three, I'm gonna put some glue right here and then I've drawn some lines on to line everything right into the center. Basically, that's going to give it the best bond possible. Considering me it's gonna be at the base and it's going to be being hit.
A lot and kicked around by your feet, I want to make sure that bond is really strong. So again, I'm just using tight bond is the glue. I love this stuff. It works really great. Okay, as you can see, I've already screwed one end and I'm just making sure that being a square in a line you can draw a line as I did, but I always like to take my square and line it up and make sure it's perfectly true, and This is one of the good ways to do it. These are really handy to use. If you don't have one anymore, okay, you can see I've attached 1/4 of the sides that I have to do for the coffee table.
The second part of this gets a little tricky because you can't stand it up on its edge because it's already attached to this, so I hadn't screwed in standing straight up, which is a little bit more challenging, but that's it. I just have to repeat this three more times and I will have the base and then I will do the top skirt up here and install that alright. So I caught a mistake that I had. I actually I put the skirt level to this line, which Ashley need to drop it by 3/4 of an inch to accommodate for the slats that are gonna be sitting on top of it. So that way, when you're looking at the table, this is the under the table. I guess it had enough room, so I just got to make an adjustment.